Ultimate Guide To Plasterer Costs In Australia

Understanding Plasterer Pricing in Australia: An In-depth Guide

Pricing for plastering services can often be a complex landscape to navigate. With this comprehensive guide, we aim to illuminate the cost structure of plastering services in Australia, discussing average rates, specific tasks, and the influence of location on pricing.

Detailed Insight into General Plastering Pricing and Rates

Typically, plastering services are charged per square meter. However, these costs can fluctuate significantly, depending on the intricacy of the work, the materials employed, and other contributing factors. Here’s an in-depth look:

Plastering price per square meter in Australia

A basic measure to understand plastering services’ pricing is the cost per square meter. In Australia, plastering for a flat wall generally costs between AUD $15 and $20 per square meter. This price may escalate to $30 or more for plastering ceilings or crafting complex wall designs. These tasks require more time, skill, and effort, thus justifying the higher cost.

Plastering Pricing List by Specific Task: A Comprehensive Breakdown

The cost of plastering can greatly differ based on the specific task involved. We’ve detailed below the typical costs you can anticipate for a range of plastering services:

Plasterboard Installation Cost

When it comes to installing plasterboard, the cost generally varies between AUD $15 to $20 per square meter. This figure can change based on the size and complexity of the job.

Drywall installation Costs

Drywall installation often incurs a higher cost, usually within the range of AUD $20 to $30 per square meter, due to the additional steps involved compared to standard plasterboard installation.

Ceiling Plastering Cost

As ceilings present more challenges, the plastering costs are usually higher, ranging from AUD $25 to $35 per square meter.

Wall Plastering Costs

Wall plastering usually falls between AUD $15 and $25 per square meter, with the cost varying depending on the wall’s complexity and the plastering techniques used.

Plastering Repair Service Costs

Repair costs for plaster can vary greatly based on the extent of the damage. Minor repairs may only set you back as little as AUD $50, but significant damage could cost several hundred dollars to repair.

Price To Plaster A Wall In Australia

When it comes to plastering an entire room, the overall cost will primarily depend on the room’s size and the complexity of the plastering required. You’ll also need to factor in whether the room includes ceilings and whether any existing plaster needs to be removed or repaired.

As previously noted, the general price for plastering in Australia typically ranges from AUD $15 to $20 per square meter for a flat wall and can escalate to AUD $25 to $35 per square meter for a ceiling. Given these rates, here is what you might expect to pay for plastering an entire room:

Small Room (approx. 10 sqm total area)

A smaller room, such as a bathroom or small bedroom, would generally cost between AUD $300 to $500 to plaster if it includes only walls. If the ceiling also requires plastering, the price might increase to around AUD $500 to $700.

Medium Room (approx. 30 sqm total area)

For a medium-sized room like a master bedroom, you could expect to pay anywhere from AUD $900 to $1,500 for wall plastering. If the ceiling is also included, the cost could escalate to around AUD $1,500 to $2,100.

Large Room (approx. 50 sqm total area)

Large rooms, such as an open-plan kitchen/dining area, might cost between AUD $1,500 to $2,500 to plaster the walls. If you’re plastering the ceiling as well, the total price could be in the range of AUD $2,500 to $3,500.

These costs are a general guide and can fluctuate based on factors such as plaster type, wall condition, and intricacy of the work. It’s also worth mentioning that bulk jobs, like an entire room, might sometimes attract a discount compared to plastering smaller areas.

Float and Set Plastering Prices: Understanding the Costs

Float and set plastering is a specific plastering technique typically used to prepare walls for decorating. This technique involves two stages: the ‘float’ stage where a backing plaster is applied to give the wall a flat and even surface, followed by the ‘set’ stage where a thinner layer of ‘finishing’ plaster is applied to provide a smooth surface for decoration.

Why Is Float and Set Plastering More Expensive?

The cost for float and set plastering tends to be slightly higher than other methods due to the labor-intensive nature of the job and the skill level required. The process involves applying two separate layers of plaster, which means more time and material consumption. Moreover, it requires a significant level of precision to ensure the walls are evenly plastered and ready for decoration.

General Cost Estimates for Float and Set Plastering

Float and set plastering in Australia generally ranges from AUD $25 to $35 per square meter for walls. If you’re considering this plastering technique for your ceiling, which is more labor-intensive, the cost can increase to about AUD $40 to $50 per square meter.

Factors Affecting Float and Set Plastering Prices

Keep in mind that these costs can vary based on various factors, including the size of the area to be plastered, the condition of the walls or ceiling, and the plasterer’s experience and expertise. It’s also worth noting that some plasterers may offer a fixed price for the whole job, especially if you’re looking to get an entire room or property plastered.

Location-Specific Plastering Pricing Australia: A Closer Look

Similar to other service-based industries, the cost of plastering can shift significantly based on geographical location. While the above averages provide a good baseline, the following are more specific estimates per major Australian city:

Plastering cost in Brisbane

Brisbane often leans towards the lower end of the pricing scale, with average costs around AUD $15 to $20 per square meter.

Plastering cost in Sydney

Sydney, characterized by its higher living costs, typically sees plastering prices hovering around AUD $20 to $25 per square meter.

Plastering cost in Perth

Perth strikes a middle ground, with average plastering costs around AUD $18 to $23 per square meter.

Plastering cost in Melbourne

Melbourne’s plastering costs, like Sydney’s, lean towards the higher end, with prices around AUD $20 to $25 per square meter.

Remember that these are just estimates, and actual prices can deviate based on a variety of factors. It’s always advisable to request a detailed quote before moving forward with any plastering job.

Aussie plumbing works and price

Plasterer Price FAQs Australia

What is the average cost per square meter for plastering services in Australia?

The average cost typically falls between AUD $15 to $20 per square meter for flat walls. More complex tasks such as plastering ceilings or crafting intricate wall designs may cost up to AUD $30 or more per square meter.

How does the cost of plastering ceilings compare to walls?

Due to the higher complexity and effort required to plaster ceilings, the cost is generally higher compared to walls. Expect to pay between AUD $25 to $35 per square meter for ceiling plastering.

What is the typical cost of plastering services in major Australian cities?

In Brisbane, the cost is generally between AUD $15 to $20 per square meter. In Sydney and Melbourne, it’s higher, typically between AUD $20 to $25 per square meter. Perth falls in the middle, with average costs around AUD $18 to $23 per square meter.

Are plastering costs higher for drywall installation?

Yes, drywall installation generally costs more than standard plasterboard installation due to the additional steps involved. Expect to pay between AUD $20 to $30 per square meter for drywall installation.

How much does it cost to repair plaster?

Repair costs can range greatly depending on the extent of the damage. Small repairs could cost as little as AUD $50, but larger repairs could run into the hundreds of dollars.

Are prices for plastering services negotiable?

Prices can sometimes be negotiable, depending on the job’s scope and the specific contractor. However, it’s important to ensure that a lower price doesn’t compromise the quality of the work.

Why is plastering more expensive in some areas?

Factors such as the cost of living, demand for services, and local market conditions can all influence the cost of plastering services in a specific area.

Does the type of plaster used affect the price?

Yes, different types of plaster and plastering techniques can influence the final cost of the job. It’s important to discuss this with your contractor when obtaining a quote.

What should I consider when hiring a plastering contractor?

In addition to cost, consider the contractor’s experience, reputation, and the quality of their previous work. Remember, a cheaper price can sometimes mean lower quality work.

Can I plaster my own walls to save money?

While it’s possible to DIY plastering jobs, it’s generally recommended to hire a professional to ensure a high-quality, durable finish. Improperly done plastering can lead to problems down the line that may end up costing more to fix.

Final Thoughts

The world of plastering costs can indeed be a complex landscape to navigate. With thorough research and an understanding of pricing structures, however, you can be better prepared to ensure you’re receiving fair value for your investment. Keep in mind that while cost is an important factor, quality and durability of the work should not be compromised. An inexpensive plastering job might seem like a good deal initially, but if the workmanship is subpar, it could lead to expensive repairs and rework in the future.

If you are a plasterer in Australia looking to get assistance with pricing your projects and getting quotes out to clients faster, contact us today. Our fast and professional QS team are here to help.

About The Author

Leave a Comment

Your email address will not be published. Required fields are marked *